AUG time

So I sitting here one day doing some research for a paper and I somehow ended up on an airsoft site. I stumbled across a few AUG pictures and thought that since Horton seems attached to his AUG that maybe I should accept that and try to like them.

that CQB winter AUG in the top pic is pretty cool. Those are great shots. Sentinel has some good pics of the rails system on his aug...very nice

My camo paint job on my aug phantom



before...

The project is almost finished (upper picture), just got to receive my new bipod... I've change my rings for my scope to lows instead of high (was quite hard to aim...). I will post pics of the complete project!

Thx for the compliments on my augs Hortons!

Nice, I really like the AUG on top, although I believe I saw it on the chopping block on ASC . I was going to ask if you had made that rail on the other one, but I found a link to a few on UNCompany. Did you paint that yourself Sentienl? By the way nice AUG's!

Horton, today we were out playing and my buddy lent me his AUG, and despite how I first felt about them, it was a pretty sweet gun... although I had a tendency to try to insert the mags in the front right underneath the trigger instead of under my armpit...

better life through bullpups...

beach_boy wrote:

Did you paint that yourself Sentienl?

Yeah i've painted myself. See this thread on ASC http://www.airsoftcanada.com/showthread.php?t=29976

For the railed one, i've bought a kit on WGC. But this gun is sold by now. I've changed my mind for a new project for CQB and a winter gun, a FAMAS! Which more manoueuvrable and lighter. Lesser Total weight will be important on my snowshoes. The AUG with the rail has a poorly balanced heavy weight and less manoeuvrable than the Famas.

I thought the FAMAS had a version 1? Wouldn't that be kind of sketch to use in the winter? And snowshoes! Man, Horton when are we going to be this hardcore?

Nice paint job, and good walkthrough on ASC

I've thought about snow shoes...

I'm with beachy on the fears of a V1 in the cold.

I've got snow shoes I'm planning on using if we play in deep snow. They need some maintnace though and I don't realy know what I'm doing there. Snow shoes are great in deep snow if you have them I can walk in waste deep snow faster then most can run, and If I have to I can run in them. I use the old fasiond style cause the new small plastick ones are only good on packed trails.

Why am I talking about snowshoes on a Aug thread?

Sent your the AUG expert what would you call this? Anyone know if of positive thread 14mm flashider? Ultimate CQB.

Also I installed my KM titanium tightbore and am chronoing at 295-295 an increase of 14fps with no internal mods!!! WOOT!

That's pretty sick Horton, if you could find a 14mm + flashider that would be pretty sweet... by the way, by next spring I should have a little experience with upgrading...

the inner barrel length up to the threading on that is really close (within mms) of the M4 inner barrel. Anybody have one?

here's a pic of what my CQB AUG will look like when I get a flash hider that fits the new end. I love that it stil has the same barrel lenth of an M4....BULLPUPS!!

Ok all I need is the M4 inner barrel and this CQB aug is done! Installed a gaurder steel foregrip stem, clockwise flash hider, cqb front....sweet!

Total length...25 3/4 inches

that's pretty sweet there Horton. If you had a M16 length or SIG length inner barrel I'd trade yah my M4 one.

Is your bottom receiver painted or is that the stock color?

stock-that's the military bottom with a civi top.

Wow I love your CQB AUG. Nice mod!!! You will have to tell me how you've done this!!!

For the moment, a few newer pics of my Aug (again).

http://www.atfquebec.com/album_pic.php?pic_id=158
http://www.atfquebec.com/album_pic.php?pic_id=162

Hey Sentinel, If you take a look at Horton's AUG he has electrical tape holding it in place... got any suggestions to secure it without the use of tape?

do you know of any good HBAR kits in canada Sent? I'll post up later the parts I got to do the mod...I'm really tired after todays game and feal kinda lazy.

What gear look are you going for in those pics?

replaces outer barrel, need to cut aluminum sheath down to the plastic that surrounds the inner barrel
search word AUG on ASC armoury, WGC or redwold should find this part.

That's really it, this part has a pos thread so I had to find a pos flash hider (armalite birdcage from ILLusion) and then an M4 inner barrel. Fun Fun FUN!

beach_boy wrote:

Hey Sentinel, If you take a look at Horton's AUG he has electrical tape holding it in place... got any suggestions to secure it without the use of tape?

What's the electrical tape supposed to hold? Tell me what's the problem?

the take down bolt comes all the way out of the gun. I can't just push it back in because it comes out to easily and the reciever will fall off unexpectedly...not good.

maybe that it's just the small metal part underneat the pin (you know the little piece of metal that is in the hole) that is fed up (or missing). Maybe you can try to re-bend it straight in position or replace it. Or verify that the litlle metal pin of the bottom side of this part is there and not too worn. It coulbe also a combination of those 2 things.

BTW, I have never seen someone with a complete HBAR mod in quebec province or ASC. It's seems that an old company (maybe closed) was making a kit a long time ago but it's discontinued. If you find one with the outer barrel, flash hider and bipod... it's a valuable collector item. Never heard about that someone has one in Canada, even in the States... That's a great mod, they should have it back.... sniff!

Here's my cute baby AUG project

http://www.atfquebec.com/album_pic.php?pic_id=218

I've cutted down, grind, and repolish the inner barrel with a dremel to fit it.

P.S. Look Hortons! It's the body you've sold to me! I've removed the beautiful sticker of the japan team (I've really hesitated to do so. But because I play sometimes in the snow and rain... it must go off).