Sticky selector switch.

The fire selector switch on my G36C doesn't engage properly and is sometimes very stiff. I suspect there is a problem inside that is physically causing the switch to bind ( wire maybe. )
Any local gun dudes around willing to take a look??
Horton has been awesome, but not sure if he is already on holiday.
Cheers
Peter

I think Horton is at camp for the summer.

I'm willing to help you out. But first I have a couple recomendations you try. I had the same proble with mine and it wasn't a wire in the way. there shouldn't be a wire close to the selector. on mine the little hex screw on the lever part that you move had loosened off, this caused it to set a little crooked and made it feel stiff.

I think Billy is right. Take off the fire selector via the screw on the switch, be careful when taking it off, it may have a ball bearing or spring/rubber nub combo and they may want to take off.

Take the fire selector apart and re-assemble. There are only 5 parts, including the screw, and it isn't very complex. Give it a try, and if it still isn't working correctly give Billy or me a PM and we'll work from there.

Thanks guys...I'll give it a go and let you know.
Cheers

Alright...
I'm an idiot. Anyone that can help me with this...it would be greatly appreciated!
Peter

http://www.mechbox.com/?s=g36

these might help you out

I think I'd rather hire a gun doctor for an hour to fix it...

if i was there i would do it for free.

I'll be back in two weeks.

Thanks, guys. Dave, please email me when you get back.
Thanks!
Peter